Important Safety Information
For your own safety and that of your equipment, always take the following precautions.
Important:
The only way to shut off power completely is to unplug the power cord.
Make sure at least one end of the power cord is within easy reach, so you can unplug
the Xserve when you need to.
Disconnect the power plug (by pulling the plug, not the cord) if any of the following
conditions exist:
You want to remove any parts (leave the cord disconnected as long as the cover
Â
is off).
The power cord or plug becomes frayed or otherwise damaged.
Â
You spill something into the case.
Â
The Xserve is exposed to rain or any other excessive moisture.
Â
The Xserve has been dropped or the case has been otherwise damaged.
Â
You suspect that the Xserve needs service or repair.
Â
You want to clean the case (use only the recommended procedure described later).
Â
Be sure that you always do the following:
Keep the Xserve away from sources of liquid, such as washbasins, bathtubs, shower
Â
stalls, and so on.
50
Appendix B
Safety and Maintenance
Protect the Xserve from dampness or wet weather, such as rain and snow.
Â
Read all the installation instructions carefully before you plug the Xserve into a
Â
grounded electrical outlet or power strip.
Keep these instructions handy for reference by you and others.
Â
Follow all instructions and warnings dealing with the Xserve.
Â
Electrical equipment may be hazardous if misused.
The model of server described in this manual is certified only as a component for use
with other equipment, where the suitability of the combination has been determined
by a Nationally Recognized Testing Laboratory.